MIPRO TA-80

The TA-80 has a flat and wide frequency response, ultra-low T.H.D. and noise floor, fast transient response, strong anti-interference and high S/N ratio characteristics.
These superior characteristics resolve the problems of tangling microphone cables and the deterioration of analog transmission characteristics, making the TA-80 the best system to reproduce the natural sound of any premium wired microphone.
With the balanced XLR mic input jack for installing on any condenser microphone, the TA-80 also provides 8 gain levels and a built-in switchable 12 / 48V, up to 10 mA current load phantom power for condenser microphones.
The phantom power can be switched off for use with dynamic microphones.
A built-in high-capacity lithium battery enables a continuous 5 to 8 hours of use per charge.
Can be recharged by dropping it into an intelligent MP-80 charger or by removing the single battery cell from the TA-80 and placing it into the charger.
Reverse polarity protection and battery replacement is fast and easy.
Compact, lightweight and ruggedly built. The streamlined aluminum housing is splash-proof with strict isolation of spurious and external noise interference.
It has a built-in high efficiency transmitting antenna and a green backlit LCD clearly displays operation parameters.
Compatible with MIPRO’s ACT-80/80R miniature digital receivers for a variety of professional audio applications.
Frequency: UHF 540-604 MHz – UHF 636-700 Mhz
Housing Aluminum alloy
Frequency Range UHF 480 – 960 MHz
Switching Bandwidth 64 MHz
RF Output Power 10 mW / 50 mW switchable (country dependent)
Spurious Emissions -60 dBc
Antenna Internal
Modulation Type Digital modulation fixed envelope
AF Input Level
2 V max. at AF gain = 0 dB
7 V max. at AF gain = -12 dB
20 V P-P by protective circuit
LCD Display
Group, Channel, Frequency, AF gain, Low-cut, Limiter, Encryption status, RF power, Phase, Lock status, Mute mode, Battery status & Error codes
Gain Setting +30 dB, +24 dB, +18 dB, +12 dB, +6 dB, 0 dB, -6 dB, -12 dB , -18 dB (9 settings). 0 dB = microphone sensitivity
Phantom Power
Selectable 12 V and 48 V at 10 mA max
AF Frequency Response 20 Hz ~ 20 kHz, selectable 100 Hz low cut filter
Mic Input Balanced XLR
Battery Type ICR 18500 lithium battery
Battery Life
> 8-hour for RF power at 10 mW and phantom power off.
> 4.5-hour for RF power at 50 mW and 48 V at 2 mA phantom power on.
Current Consumption Approx. 140 mA (Low power, phantom power off)
Dimensionn 44 × 114 × 37mm
Net Weight 165gr