Has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords.
Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofer, the 206A, is a two-way, bass reflex design housed in 12mm birch plywood. A full-grille
design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
optional U-bracket can be used for wall-mounting.
For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket.
DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with pushto-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid
and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.
Built-in amplifier rms/peak LF 700/1400W
Built-in amplifier rms/peak HF 200/400W
LF / HF (inch) 2x 6.5” – 1.5” coil / 1” – 1.4” coil
Frequency response (@-6dB) 70Hz – 20KHz
SPLmax cont/peak 124 / 131db
DSP presets Original / Live, Vocal, DJ, Touring, Loudness, Warm, 2 empty slots for users (5 parametric equalizers per slot), high-pass filter, mic/line selector, low, mid and high tone settings, optional delay 0 – 3.5m, limiter modes Max SPL / Max Quality
Dispersion 70° x 50° rotatable
Input impedance (kOhm) 22
Housing 12mm birch plywood anti-scratch paint
Rigging U-bracket can be used for wall-mounting,aluminum handle with rubber inserts, 35mm top hat polemount socket
Control Panel Balanced XLR/Jack input, XLR LINK OUT, 2x Volume, RCA Stereo input, DSP display with rotative encoder and push
AC Power requirements 640VA
Input connectors XLR with loop, RCA ST
Power cord 5m / Neutrik POWERCON TRUE1
Net Dimensions 190x560x260mm
Net weight 12kg
FBT VENTIS 206A
Processed Active Speaker, 2-way, bi-amplified
Power: 700W + 200Wrms
LF: 2x 6.5″ woofers with 1.5″ voice coil custom made for FBT
HF: Driver with 1.4″ B&C diaphragm & 1″ exit throat
SPLMax: 131dB SPL
high-pass filter, mic/line selector, low, mid and high tone settings, optional delay 0 – 3.5m, limiter modes Max SPL / Max Quality
Constant Directivity rotatable Horn: 70°x 50°
Availability: 5-7 days