VENTIS 115
Has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords.
Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofer, the 115, is a two-way, bass reflex design housed in 15mm birch plywood. A full-grille
design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
M10 points are included as standard while an optional U-bracket can be used for wall-mounting.
For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with pushto-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid
and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.
Configuration: 2-Way
Built-in amplifier rms/peak LF: 700/1400
Built-in amplifier rms/peak HF: 200/400
LF / HF 15” – 2.5” coil / 1” – 1.7” coil
Frequency response (@-6dB): 42Hz – 20KHz
SPLmax cont/peak: 127 / 133 db
DSP presets: Original / Live, Vocal, DJ, Touring, Loudness, Warm
Dispersion: 80° x 50° rotatable
Input impedance (kOhm): 22
Housing: 15mm birch plywood
Rigging: M10 points, U-bracket can be used for wall-mounting,aluminum handles with rubber inserts, 35mm top hat polemount socket
Control Panel: Balanced XLR/Jack input, XLR LINK OUT, 2x Volume, RCA Stereo input, DSP display with rotative encoder and push
AC Power requirements: 640VA
Input connectors: XLR with loop, RCA ST
Power cord: 5m
AC Power connector: Neutrik POWERCON TRUE1
Net Dimensions: 427x765x420mm
Net weight: 25kg
FBT VENTIS 115A
922.00€
Processed Active Speaker, 2-way, bi-amplified, bass reflex design
Power: 700W + 200Wrms
Equipped with:
LF: 15″ woofer with 2.5″ voice coil custom made for FBT
HF: Driver with 1.7″ B&C diaphragm & 1″ exit throat
SPLMax: 133dB SPL
DSP: 6 versatile presets, 2 empty slots for users (5 parametric equalizers per slot),
high-pass filter, mic/line selector, low, mid and high tone settings, optional delay 0 – 3.5m,
limiter modes Max SPL / Max Quality
Constant Directivity rotatable Horn: 80°x 50°
45° monitor taper
Availability: 5-7 days